• Cost effective
  • Safe technology
  • No chemicals required
  • Easy installation (When using a specialist)
  • Treats every tap in the line
  • 100% peace of mind

Suits Whole House/multiple dwellings, and small/large commercial requirements

Whole House Aqua High-Output UV ‘Plug & Play’ System Features:

Coarse filtration – 20 micron washable pleated polyester cloth type cartridge for the bulk of the suspended solids removal. Can be washed up to a maximum of four times and re-used. Also known as a surface filter meaning that once the outside surface of the fabric is soiled it needs to be cleaned.
Fine Filtration – 1 micron depth cartridge for removal of very fine particles. Dual Grade Density (DGD) Sediment Filters’ spun fibres form a true gradient density from outer to inner surfaces, it combines selective final filtration with appropriate pre-filtration to achieve up to three times the dirt-holding capacity of similar size sediment cartridges.
Carbon Filter – Removes chlorine, asbestos, chemicals, and unwanted taste and odours (that may be present) from your water, alternatively this can also be achieved by installing a Bench Top or Under Bench Water Filter at the point of use in your kitchen
UV Steriliser – Not only is it safe and highly effective, UV does not change the taste, colour, or odour of water. It simply removes the risk of illness caused by microbial contamination, making water safe. UV light penetrates micro-organisms and destroys their ability to reproduce, effectively rendering them harmless. It’s a simple but effective process, destroying a minimum of 99.99% of harmful micro-organisms, including E.Coli, Cryptosporidium and Giardia.


Future proof your UV system with the latest technology and UV controllers. A colour user interface allows for easy visual identification of remaining lamp life and any fault codes or errors. Sample screen shots as below.
UV SENSOR MODULE (Optional Upgrade)
• Allows the 254nm UV wavelength to be measured and displayed via the controller. The sensor plugs directly into the controller and is mounted in the sensor port located on all Aqua UV POE chambers.
Each cover comes with a DIY mounting base for your pump that the cover slides over.
• Well vented to prevent pump overheating
• Easy to install in most environments
• Optional concrete slab base
 Whole House UV Systems “Plug & Play” (Weather-proof Cover with Pump Options)